1/2in Rounded Hex Shafts are compatible with the REV ION System and are a ready-to-use length of hex shaft that have been cut to length and have the ends tapped. The ends are tapped #10-32 in order to accept a screw and washer or shaft collar. The 1/2in hex is compatible with the shaft retention method of the MAXPlanetary output stage. The 1/2in Rounded Hex Shaft - 36in is not tapped.
1/2in Rounded Hex Shafts
מק"ט: REV-21-1135
130.00 ₪מחיר
כולל מע״מ
- 1/2in hex profile is compatible with common FRC motion products
- Rounded corners form a 13.75mm circle for use with compatible round bearings
- Compatible with MAXPlanetary output stage
- Pre-sized to round-number lengths
- Pre-tapped for shaft retention screws (1/2in Rounded Hex Shaft - 36in is not tapped)
- Length: Varies (see table below)
- Hex Size: 0.5in (12.7mm) Across the Flats
- Round Diameter: 0.541in (13.75mm)
- Thread Size (both ends): #10-32
- Thread Depth (both ends): 0.5in (12.7mm)
- Material: Aluminum 7075
- Finish: Black Anodized