top of page

This kit contains the components specific to the type of motor used with the MK4/MK4i Swerve Module.

Please note:

If you are converting to a Kraken X60 setup, you will also need the Kraken-specific Motor Riser Kit.

Kit, Pinion Gear

החל מ- 120.00 ₪

Option

MK4

MK4i

MK4n

For Motor Shaft

Kraken X60

כמות

The MK4 Kit only works with L1-L2-L3 Gear Ratios

Gear, 20DP, SplineXS Bore

Drive Pinion Gear

MK4 Swerve Module with L1, L2, or L3 ratio: 14T

MK4 Swerve Module with L4 ratio: 16T

Quantity: 1

Gear, 32DP, 15T, SplineXS Bore

Steering Pinion Gear

Quantity: 1

Screw, 10-32 X 1/2 Button

Secures the Gears and Spacers to the Motor Shafts

Quantity: 2

Spacer, 0.315 x 0.438 x 0.125

Goes above the Drive Pinion Gear on the Motor Shaft

Goes above the Steering Pinion Gear on the Motor Shaft

Quantity: 2

Spacer, 0.315 x 0.438 x 0.375

Goes above the Drive Pinion Gear on the Motor Shaft

Goes above the Steering Pinion Gear on the Motor Shaft

Quantity: 2
Gear, 20DP, 14T SplineXS Bore

Drive Pinion Gear

Steering Pinion Gear

Quantity: 2

Screw, 10-32 X 1/2 Button

Secures the Gears and Spacers to the Motor Shafts

Quantity: 2

Spacer, 0.315 x 0.438 x 0.125

Goes below the Drive Pinion Gear on the Motor Shaft

Goes above the Steering Pinion Gear on the Motor Shaft

Quantity: 2

Spacer, 0.315 x 0.438 x 0.375

Goes above the Drive Pinion Gear on the Motor Shaft

Goes above the Steering Pinion Gear on the Motor Shaft

Quantity: 2

Spacer, Semicircle, 0.196 ID x 2.000 BC x 0.063 Th

Goes between the Screw Spacers and Motors

Quantity: 2
2 - Gear, 20DP, 16T SplineXS Bore

2 - Screw, 10-32 X 1/2 Button

2 - Spacer, 0.315 x 0.438 x 0.125

2 - Spacer, 0.315 x 0.438 x 0.375

2 - Spacer, Semicircle, 0.196 ID x 2.000 BC x 0.063 Th

bottom of page